>> แจ้งความต้องการสินค้า <<

• Correctly connect the Control Box,Handset,Power Wire,Lifting Column,  Patch Cord.

• Plug the power cord into 110VAC outlet:The Digital Tube will display “PON” for seconds it means electrified successfully,need to reset.
    - After reset the Digital Tube will display 23(MM),reset finished.
  RESET:
    - Press and hold the down button, after 5 seconds the desk will begin to lower, until to the lowest height then slightly rise.Reset finished.
    - Release the down button.
• After reset,press and hold “UP” button,lifting column will rise,release to   Stop.
• After reset,press and hold “DOWN” button,lifting column will fall, release to Stop. 
• How to memory:
    - After pressing and holding UP/DOWN button to a height,press button S first,then press button 1,this height will be remembered by button 1.Still  pressing and holding UP/DOWN button to another height,press button  S,then press button 2,this height will be remembered by button 2.The same way,the button 3,4 can remember other heights.
    - After memory,press 1/2/3/4 button,desk will motion to the height it   remembers,press “UP” and “DOWN” button.The motion will be stopped.

1. This product must be used under the correct technical parameters.
2. Keep away from liquids,corrosive gases,dusty environment.
3. Contact our factory when necessary.

• 1 x Two-foot two-section Lift Desk(Without desktop)
• English user manual will send by Email