PTE031 : โฟโต้เซนเซอร์ โฟโต้อิเล็กทริคสวิทซ์ BEN500-DFR AC/DC Autonics(ของแท้) Original Diffuse Reflective Photoelectric Switch Sensor Sensing Distance 500mm Relay Output ประกัน 1 ปี

1,390 บาท

มีสินค้าอยู่ 4

แจ้งความต้องการสินค้า

รายละเอียดสินค้า ข้อมูลจำเพาะ Reviews

โฟโต้เซนเซอร์ โฟโต้อิเล็กทริคสวิทซ์ BEN500-DFR AC/DC Autonics(ของแท้) Original Diffuse Reflective Photoelectric Switch Sensor Sensing Distance 500mm Relay Output ประกัน 1 ปี >> เช็คสต๊อคสินค้า << BEN Series is built-in amplifier type in a compact size. This type has an indicator to allow users to identify operation status of sensors from a long distance. Features

Small and power supply built-in type.
Easy installation with LED indicators on product.
Able to set the operation mode by switch. (Light ON/Dark ON)
Status and output LED indication
Built-in IC photo diode for ambient light and electrical noise.

Specifications:

Model: BEN500-DFR
Sensing type: Diffuse reflective
Sensing distance: 500mm
Sensing target: Translucent, Opaque materials
Hysteresis: Max. 20% at ratedsetting distance
Response time: Max. 20ms
Response time: 24-240VAC ±10% 50/60Hz, 24-240VDC ±10%(Ripple P-P : Max. 10%)
Power consumption: Max. 4VA
Light source: Infrared LED(940nm)
Sensitivity adjustment: Adjustment VR
Operation mode: Selectable Light ON or Dark ON by VR
Control output: Relay contact output
- Relay contact capacity: 30VDC 3A of resistive load, 250VAC 3A resistive load
- Relay contact composition: 1c
Relay lifetime: Mechanically: Min. 50,000,000 operation, Electrically: Min. 100,000 operation
Light receiving element: Photo IC
Indicator:
- Operation indicator : red
- Stability indicator : green
- (The red lamp on Emitter of transmitted beam type is for power indication)
Insulation resistance: Min. 20MΩ(at 500VDC megger)
Insulation type: Double or strong insulation (Mark : Dielectric voltage between the measured input and the power: 1kV)
Noise resistance: ±1,000V the square wave noise(pulse width : 1μs) by the noise simulator
Vibration
- Mechanical: 1.5mm amplitude or 300m/s² at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
- Malfunction: 1.5mm amplitude or 300m/s² at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Shock
- Mechanical: 500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times
- Malfunction: 100m/s2(approx. 10G) in each of X, Y, Z directions for 3 times
Environment
- Ambient illumination: Sunlight : Max. 11,000lx, Incandescent lamp : Max. 3,000lx(Receiver illumination)
- Ambient temperature: -20 to 65°C, storage : -25 to 70°C
- Ambient humidity: 35 to 85%RH, storage : 35 to 85%RH
Protection: IP50(IEC standard)
Protection: IP50(IEC standard)
Material:
- Case, Case cover: Heat resistant ABS
- Sensing part: PC(with polarizing filter: PMMA)
Cable: ø5, 5-wire, Length: 2m(Emitter of through-beam type: ø5, 2-wire, Length: 2m) (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: ø1.25)
Accessory:
- Individual: Reflector(MS-2)
- Common: VR adjustment driver, Mounting bracket, Bolts/nuts

*1: The sensing distance is specified with using the MS-2 reflector and same as the MS-4 reflector. Sensing distance is setting range of the reflector. The sensor can detect under 0.1m. *2: It is for Non-glossy white paper(100×100mm). *The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment. Manual: Download Dimension รับประกันสินค้า 1 ปี

Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.