>> เช็คสต๊อคสินค้า <<

• Categorise: Incremental Shaft model
• Diameter: 40 dia.
• Power supply voltage: DC5-5% to 5+5% V (ripple (p-p): 5% max.)
• Current consumption: 160 mA DC max.
• Resolution: 2500 P/R
• Inrush current: Approx. 9 A (Time: Approx. 0.3 ms)
• Output phases: A, -A, B, -B, Z and -Z
• Control output (Output type): Line driver output
• Control output (Output voltage): Vo: 2.5 V min. Vs: 0.5 V max
• Control output (Load current): High level (Io): -20 mA /Low level (Is): 20 mA
• Starting positional point: Equipped
• Max. response frequency: 100 kHz
• Phase difference on output: 90±45°between A and B (1/4 T ± 1/8 T)
• Starting torque: 0.98 mN.m max.
• Moment of inertia: 1 x 10**-6 kg.m**2 max.
• Shaft loading: Radial: 30 N / Thrust: 20 N
• Max. permissible rotation 6000 r/min
• Ambient temperature Operating: -10 to 70 /Storage: -25 to 85 (with no icing)
• Ambient humidity Operating: 35 to 85% RH /Storage: 35 to 85% RH (with no condensation)
• Insulation resistance: Between charged parts and the case: 20 MΩ min. at 500 VDC
• Dielectric strength: Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min
• Vibration resistance: 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions
• Shock resistance: 1000 m/s**2 for 3 times each in X, Y, and Z directions
• Degree of protection: IEC: IP50
• Connection method: Pre-wired models (Cable_length: 0.5 m)
• Material (body): Aluminum
• Material (case): ABS
• Material (shaft): SUS420J2
• Weight (packed state): Approx. 100 g
• Accessories Instruction manual, coupling and hex-head spanner