หมวดสินค้า

หมวดสินค้า

HDO019 : ตู้อบเพาะเชื้อ ตู้อบบ่มเชื้อ Memmert Incubator IN75 ความจุ 74 ลิตร อุณหภูมิ 80 องศา (สั่งซื้อ2-3วัน)

ตู้อบเพาะเชื้อ ตู้อบบ่มเชื้อ Memmert Incubator IN75 ความจุ 74 ลิตร อุณหภูมิ 80 องศา (สั่งซื้อ2-3วัน)

>> แจ้งความต้องการสินค้า <<

.

The incubator I is at home everywhere in the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.

  • Incubator IN75
  • Standard delivery Incubator
The heating of this incubator is optimally tuned for natural convection and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully. รายละเอียดสินค้า
  • ความจุประมาณ 74 ลิตร
  • ควบคุมอุณหภูมิได้ตั้งแต่ 5°C เหนืออุณหภูมิห้องถึง 80°C
  • มีความละเอียดในการปรับตั้งได้ 0.1 องศาเซลเซียส
  • ตั้งเวลาการทำงานได้ 1 นาที ถึง 99 วัน หรือ ทำงานต่อเนื่อง
  • หน้าจอแสดงค่าอุณหภูมิเป็นแบบ TFT สี เรืองแสง (TFT-colour display)
  • ปรับอุณหภูมิได้ 2 หน่วย คือ องศาเซลเซียส (°C) และ องศาฟาเรนไฮต์ (°F)
  • ภายใน และ ภายนอกตู้ทำจากสแตนเลสโดยมีแผ่นภายนอกด้านหลังทำด้วยเหล็ก เคลือบกันสนิม
  • เลือกใช้ภาษาได้ 7 ภาษา คือ German, English, Spanish, French, Polish, Czech, Hungarian
  • มีระบบป้องกันเมื่ออุณหภูมิสูงเกินกว่ากำหนด
  • ภายในตู้ มีขนาด w(A) x h(B) x d(C): 400 x 560 x 330 mm
  • ภายนอกตู้ มีขนาด w(D) x h(E) x d(F): 585 x 944 x 514 mm
  • ผลิตภัณฑ์ของประเทศเยอรมนี
Stainless steel interior
  • Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
  • Volume: 74 l
  • Dimensions: w(A) x h(B) x d(C): 400 x 560 x 330 mm
  • Max. number of internals: 6
  • Max. loading of chamber: 120 kg
  • Max. loading per internal: 20 kg
Textured stainless steel casing
  • Dimensions: w(D) x h(E) x d(F): 585 x 944 x 514 mm
  • Housing: rear zinc-plated steel
Electrical data
  • Voltage Electrical load: 230 V, 50/60 Hz approx. 1250 W
  • Voltage Electrical load: 115 V, 50/60 Hz approx. 900 W
Ambient conditions
  • Set Up: The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
  • Altitude of installation: max. 2,000 m above sea level
  • Ambient temperature: +5 °C to +40 °C
  • Humidity rh: max. 80 %, non-condensing
  • Overvoltage category: II
  • Pollution degree: 2
Packing/shipping data
  • Transport information: The appliances must be transported upright
  • Customs tariff number: 8419 8998
  • Country of origin: Federal Republic of Germany
  • WEEE-Reg.-No. : DE 66812464
  • Dimensions approx incl. carton: w x h x d: 730 x 1130 x 670 cm
  • Net weight: approx. 66 kg
  • Gross weight carton: approx. 85 kg
Temperature
  • Set temperature range in °C: min. 5°C above ambient up to +80°C
  • Setting accuracy temperature: 0.1 °C
  • Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit
Control technology
  • Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
  • ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
  • Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • Function SetpointWAIT: the process time does not start until the set temperature is reached
  • Calibration: three freely selectable temperature values
  • adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
Ventilation
  • Convection: natural convection
  • Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
  • Vent: vent connection with restrictor flap
Communication
  • Documentation: programme stored in case of power failure
  • Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Safety
  • Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
  • Autodiagnostic system: for fault analysis
Standard equipment
  • Door: fully insulated stainless steel door with 2-point locking (compression door lock)
  • Internals: 2 stainless steel grid(s), electropolished
  • Works calibration certificate: incl. works calibration certificate for +37°C
  • Door: inner glass door
    รับประกันสินค้า 1 ปี

ข้อมูลจำเพาะ

Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Menu